UPVC Window repairs (http://kbphone.co.kr)

Upvc windows are energy efficient and can aid in reducing heating costs. As they get older, however, issues may arise that require to be addressed. This could include damaged hinges, handles, window repairs or locks.

DIY enthusiasts can repair wooden windows with ease. It can be cheaper than buying a new window.


Cracks and breaks can be a major problem. If they are not repaired, they can lead to water ingress, less effective barriers against cold weather, and even the risk of structural damage. Find a local builder who specializes in repairing uPVC frames. They should have the necessary skills and experience, as well as the equipment needed to get the best results. This will ensure that the crack is repaired swiftly before it gets worse, and you don’t need to replace your window unit or glass.

Small cracks in glass can be fixed with a range of home-based solutions. Masking tape and super glue are among the most popular products that can keep cracked glass in place for a few minutes. For cracks that are more extensive, tape may require to be extended on both sides.

You can also make use of two-part epoxy for repairing damaged or cracked glasses. Hardware stores typically sell this product for about $10. Make sure that your workspace is prepared prior mixing the epoxy and make sure you have the proper equipment for the job, for example, a soldering tool.

If you find that your upper or lower sash isn’t lifting it could be because the cords connected to the sashweights are damaged. This is an easy fix that is done with a ladder and a flathead screwdriver. A drip cap that is rotten can be easily repaired at home. Rot-free drip caps are available at most home centers and can be nailed and put in place using caulk. Verify that the glass in double or triple-paned window is not broken. This is because the gasses that are leaking out between the panes are responsible for improving energy efficiency and should be retained and not released.

Water Leaks

If your uPVC window is leaking, it can cause damage to your home and result in costly repairs. Water leaks can also damage the structure of your house and lead to the growth of mold. It’s important to address any issues caused by leaky windows as soon as possible to limit damage.

The most common cause of window leaks is damaged sealant around the frame. Using silicone caulking can help restore the condition of the seal back to normal and stop water leakage. Check for cracks and gaps around the window frame, and also the stone or brick wall that surrounds your windows.

Another reason that can cause leaks in windows is a blocked drainage hole or a defective flashing. Check that the drainage holes haven’t been clogged or blocked, especially after a heavy downpour. Also, you should check the window’s flashing to ensure that it’s properly sealed.

Lastly, it’s important to make sure that your drip cap isn’t broken or damaged. A damaged or damaged drip cap can allow water to enter the window from above and cause damage to the structure of your home. Replacing a drip cap isn’t a complicated job and generally a simple process of purchasing an entirely new one and putting it in the correct position.

A professional can also check your windows for watertightness. They can employ a tool to test the water-tightness of your windows and ensure that they comply with industry standards. If your windows fail the test, you’ll need to replace them. This is a costly fix but it’s worth it for the security and safety of your family.


If your windows do not close properly, it could lead to a number problems, including condensation, drafts and an increase in your energy bills. It could be a sign that the windows weren’t properly fitted at installation or the sealant has stopped working. There are several things you can try to resolve the issue.

The first step is to set up a workspace in a room with ample natural light to repair your window correctly. Start by laying down newspaper or an old blanket to shield the flooring from any splinters and drips that might fall off the windows as you work.

Use a white cloth soaked in a solution of detergent and water. This will help prevent any stains of color from appearing on your windows. If you’re ready to start working on your uPVC windows, start by making note of where the hinge channel must be situated. Unscrew the channel, and then fill the screw holes in the frame with epoxy (for uPVC frames) or wood filler. Make sure you scrape the hole you have filled before it sets.

Install the hinge channel after the holes have been filled. Be sure to center it on the window jamb, and then drill the new screw holes about a quarter-inch away from the original locations.

Then, measure the length of the spindle protruding from the underside of your handle and order an alternative online or bring your old one to a hardware store for matching. Finally, back out the setscrew that was on the operator shaft and smooth it so that the set screw will lock onto the shaft (photo). Then, your uPVC windows should be closing without a hitch.

Broken Hinges

There will be a problem opening or closing your uPVC windows in the event that the hinges are damaged or aren’t working correctly. This could be a security issue and also prevent your home from staying warm or cold. You can easily purchase an entirely new hinge for your uPVC window. However, it’s important to ensure that you have the right hinge for your windows.

This is because the hinges must be the same size to fit in the frame of the window. The most common type of hinge used in Upvc windows is an 18mm or 15mm UPVC window hinge. However, there are special types of window hinges for different kinds of frames like wooden frames. Getting the correct type of window hinge for your windows will assist you in avoiding the typical issues that homeowners encounter with their windows, like not closing properly.

The hinges of your window may be loose or stiff for several reasons. The hinges may not have been properly tightened. You can test this using a screwdriver to locate the friction screw that is at the end of the hinge and loosen it. You can then adjust it by turning it either way.

If your UPVC window hinges are not working as they should, contact Preston Glass Fix for a quick repair. Our technicians will evaluate the condition of your hinges for your windows and recommend the best option for you. We can replace the window hinges, re-tension them or install new locking mechanisms to ensure that your UPVC windows are safe and secure for the long haul.

Faulty Locks

UPVC window mechanisms and locks are an essential component of security for your home. They make it very difficult to open a window without breaking into the home. It can be frustrating when a lock malfunctions, however, you don’t have to replace the entire window.

It is often an issue that could have easily been avoided by regular maintenance. This is why we suggest that you have your uPVC windows maintained regularly using our annual maintenance program to reduce the chance of issues.

The majority of modern uPVC windows have espagnolette locks that work by pushing the handle’s nose across a wedge block, then turning the handle to close the lock. They are effective at locking the window, however when they are not maintained in a timely manner, they may start to fail. We recommend that you lubricate them with WD-40 every few times a year.

If you notice that your uPVC windows aren’t opening and shut as easily as they used to, or when the lock isn’t functioning properly, it’s likely that there is an issue with the gearbox that locks the window frame. This is often difficult to access because it requires the removal of the seals around the frame of the window, and removing the handle.

A locksmith who is skilled in upvc window repair near me repair will be able diagnose this fault quickly, and then replace the malfunctioning locking mechanism using a precise replacement. This is a quick and simple fix that could save you hundreds of dollars by avoiding the need to buy new windows.

Leave a Reply

Your email address will not be published.