Multi Fuel Stoves With Back Boiler

A multi-fuel stove with a back boiler is used to heat your home and supply hot water. They come with two water ports (1x return and 1x flow) that are 1 inch BSP in size and can be connected using standard compression fittings.

Here are a few examples of

Multi fuel stoves can be combined with a back boiler to use a variety of materials apart from logs. This provides you with more options for heat sources and helps you reduce the carbon footprint. Multi fuel stoves are designed to burn a greater variety of materials more efficiently than wood-burning stoves. Multi fuel stoves that have back boilers can burn smokeless coal turf, peat briquettes or turf and regular logs. They can be fitted with a grate raised with moving bars or a central riddling grate and asphan, both of which permit the stove to remove ash regularly. Ash will be stored in an asphan beneath the combustion area, to allow for the safe and efficient removal.

Boiler stoves have a heat output of up to 21 kw (14kw for water heating and 7kw for space heating) dependent on the model you choose. They can be connected to an accumulator tank for hot water and/or a conventional boiler or system which allows them to operate in conjunction with solar panels when needed. The boiler is housed inside the stove, usually in the back or side of the firebox. It is constructed of the thickly rolled steel, not the fragile cast iron multi fuel stoves 5kw iron.

It is also less vulnerable to corrosion since it can stand up to higher temperatures than cast iron stoves. The boiler can be pre-fitted or purchased separately. There are typically two pipes (or sometimes four) that extend out from the rear of the stove to connect to plumbing pipes.

These pipes can be connected to the hot water cylinder or directly into the radiator circuit in your home, with pumps turning on when the temperature in the tank exceeds an appropriate level. This will ensure that your radiators are heated first prior to the hot water to cook and bathe is available – a great method to keep your bills low while protecting against cold winter conditions.


The inclusion of a back boiler a multi fuel stove surround ideas fuel stove provides additional benefits for heating your home. A multi-fuel stove equipped with back boilers can heat hot water in addition to the heat produced by burning wood or other solid fuels. In the end, you can reduce the amount of gas, electricity or oil you use in your home and reduce carbon emissions.

The heat generated by the multi-fuel stove with the back boiler is used to preheat the cold water that flows through the bottom. The hot water can be used to heat your home, and even for bathing and domestic hot water taps.

When installed correctly when it is installed correctly, a boiler stove could be used to supply hot water for a small or multi fuel stoves With back Boiler larger central heating system or a thermal store, giving you more energy efficiency and lower energy bills in your home. It can also be combined with underfloor heating or solar panels to further reduce your home energy costs and carbon footprint.

A multi fuel stove with back boiler can be used to run a small, basic central heating system using wood, or to connect to a hot accumulator tank, making it a remarkably adaptable and Multi Fuel Stoves With Back Boiler cost-effective way to heat your home. It is possible to combine log boilers and back boiler to complement an existing gas central heating system to save money on installation and operating costs.

Stoves that are Eco Design 2022 compliant make use of up to six times less fuel than previous models and can aid in reducing your fuel bills and cut the environmental footprint. A range of different models are available for stoves that only supply hot water to those capable of heating up to 22 radiators and providing you with all your household hot water needs as well.

The majority of multi-fuel stoves with back boilers have the bolt-in system. Two pipes extend from the rear of the stoves and are able to connect to plumbing pipes. Other models are equipped with a water jacket, where the body of the stove is a cavity that can be filled with water and often with a pump that circulates the hot water.


The Ruben is a striking stove with a huge ceramic window with silver door handles/controls and a back-boiler integrated to provide hot water and central heat (up to 7kw for water heating and 8kw room heating). It has two water ports at the rear of the stove (1x flow & 1x return) with a size of 1.0 inch BSP (male 1 inch). “”). It can be used on either vented or unvented stoves.

A multi fuel stove with back boiler is able to be connected to a traditional central heating system via an easy non-return valve set up in a thermal store tank with an overheat protection valve. A thermal storage tank is a water tank that is insulated that acts as a neutral point for the heat produced by the stove and stores it until it’s needed.

You should ensure whether your local authorities allow the installation of a wood-burning fireplace with a back boiler and that any insurance companies are happy with the installation. Also, ensure that your plumbing system can handle the extra power that is being generated. In most cases, you will have to change the plumbing system in order to achieve this.

If your installer is experienced in this type of work, they’ll be able give you advice on what is required. However, beware of plumbers who claim to be heating engineers for solid fuel and may not understand the principles involved in this kind of system. Stovesellers has been asked many times to repair the mess created by other tradesmen. We only advise you to choose a competent engineer.

It is important to be aware that a multifuel stove with a back boiler will require a bigger cylinder. The heat output of the stove must also be matched to the needs of your home’s requirements to avoid running out of water and wasting money. Divide the total cubic meter (length as well as width and height) of the room by 14 to determine the model.


A multi fuel stove that has a back boiler is a heating device that is able to heat hot water and radiators within your home. These kinds of stoves are ideal for those who live in smaller homes or need to reduce their carbon footprint by not being so reliant on central heating systems using gas.

The back boiler of these types of stoves comprises an extensive loop that connects the hot water tank to the radiators of your home. The thermostat in your home will monitor the temperature in this loop. When it reaches the set level, the pump will automatically start to turn on. This ensures that the heating system in your property is regulated and prioritized.

A multi-fuel stove that has a back boiler allows you to burn wood or coal. This allows you to have greater flexibility with regards to your heating source. It is essential to remember that the boiler doesn’t provide free energy and you must include enough logs to meet your needs.

It is crucial to follow the safety guidelines for your area and country when installing a multi-fuel stove, which includes a back boiler. This includes the location and distance of the stove from surfaces that are flammable. You will typically find these recommendations in the manual of your stove or by referring to local building codes.

When installing a multi-fuel stove that has a back boiler, people often make the mistake of not properly prepping the hearth. This can cause a lot of problems in the future, so it’s important to follow the correct procedure.

Installing your multi-fuel stove using an additional boiler by an HETAS or certified heating engineer is the best way to ensure that it is installed correctly. They will be able to check that the stove is compatible with your existing system and that it meets all UK safety standards.

Leave a Reply

Your email address will not be published.