Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it’s best to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is significant, you may need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A window that isn’t properly aligned can cause problems with light, draughts, and even security. It’s important to take action immediately if you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. First, you’ll need to open the windows so you can access the frame. Then, using the screwdriver, you’ll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you’ve repositioned the hinges, shut your window and check for fit. If you’re satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you aren’t able to move the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It’s fairly simple to fix a loose uPVC hand. You’ll first need to close the window and perform an experiment fitting. The corners of the sash should be aligned with the casing joint. If it doesn’t then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the destruction of your home’s structure but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This will make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease It could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy process but it can be easier to do when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges are closed and open in the correct direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or by improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using the lubricant that doesn’t contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges can also become misaligned due to wear, Upvc repair which can cause gaps where the sash and frame meet. These can be easily repaired by giving them good cleaning, but when they’re beyond repair, it could be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it may be possible to just give them a clean but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts are the window replacement seals. They are susceptible to being worn out or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder. These are typically made of fabric that are filled with some type of filler. They can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than repair them. So, if you’re experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.

Leave a Reply

Your email address will not be published.